Weight | 6 lbs |
---|---|
Dimensions | 10 × 10 × 10 in |
30-200 Stucco sprayer hopper gun
$215.00 $235.00
Related Products
16-050 Spray Tip
This fine finish spray tip kit will fit only gun part number 16-311J
Assembly guide for the fine finish spray tip. Note: item # 4 is the 5/16″ spray tip. If deferent tip will be install the texture finish will change. We recommended that you select the tip size that wiil give you the best texture spray finish that you desire.
30-100HB Drywall Texture Hopper Gun
All of our texture hopper guns make the contractor’s job easier due to their user-friendly and thought-out design. However, this particular piece of equipment also comes in handy for the “do it yourself” application of stucco finish coats. In addition, it can be used to spray the first face/mist coat on the molds. Durable, effective and assembled in the US!
Read below for additional specs.
Drywall Texture Sprayer 20-230NSS
Our patented Stainless Steel Air Atomizer, P/N 20-230NSS model N, will fit most airless guns in the marketplace. Gun not included.
Gun nut adapter with “G” Thread 7/8-1 Air valve regulator.
Includes three tips: 1/8″, 3/16″, and 1/4″ round tips.
This equipment is ideal to spray texture on drywall.
30-300 Sprayer for Fireproofing, Stucco, GFRC and Mortar
The 30-300 is the best fireproofing sprayer in the market. It’s performance is unmatched by any other brand out there.
Also ideal for spraying stucco, and it does it just like a large rig.
This model can spray traditional plastering such as one coat (or three coat) stucco. Moreover, it is also capable of spraying EIFS, papercrete, straw-bale, earthen mixes, and more.
10-127/V3 Pole Gun
A special 1.25″ pole gun for spraying fireproofing Monokote Mk-6,
Cafco 300, stucco and more products.
Pointing and Grout Gun with 1 1/4″ connector Part number 50-127
Grout pointing gun with On/Off switch.
Will connect to 1.25″ hose.
30-300-E GFRC Sprayer
The 30-300-E spraying equipment features a 40 degree angle hopper. This hoppers allows to spray cement and fiber inside molds. Its design and power makes it ideal for spraying GFRC or Basalt, premix with 1/2″, 3/4″ or 1″ fiber, into counter-top molds.
Unlike the standard model 30-300, this hopper does not include 45 deg elbows.
30-200 Stucco sprayer hopper gun
Our Stucco Sprayer Hopper Gun 30-200 can be used for plastering a stucco house, traditional plastering of stuccos such as one coat or three coat stucco or GFRC.
The range is from 1/8″ heavy texture to 1″ thick structural layers.
It can also be used for applying plaster, hard coat stucco, EIFS, small scale shotcrete, papercrete, earthen mixes and more.
Hopper is made from stainless steel material, with a life time anti-rust guarantee.