Weight | 6 lbs |
---|---|
Dimensions | 10 × 10 × 10 in |
30-200 Stucco sprayer hopper gun
$215.00 $235.00
Related Products
16-311D Trigger Gun
This trigger gun supply with The Rotortex, Ez-Tex dxg, and Xt models.
16-050 Spray Tip
This fine finish spray tip kit will fit only gun part number 16-311J
Assembly guide for the fine finish spray tip. Note: item # 4 is the 5/16″ spray tip. If deferent tip will be install the texture finish will change. We recommended that you select the tip size that wiil give you the best texture spray finish that you desire.
30-100HB Drywall Texture Hopper Gun
All of our texture hopper guns make the contractor’s job easier due to their user-friendly and thought-out design. However, this particular piece of equipment also comes in handy for the “do it yourself” application of stucco finish coats. In addition, it can be used to spray the first face/mist coat on the molds. Durable, effective and assembled in the US!
Read below for additional specs.
30-300-X Hopper for spraying GFRC
The Stucco Sprayer Hopper gun 30-300 series was specially designed to spray highly viscous cement materials. These materials as listed here: Glass fiber reinforced concrete GFRC, Stucco, Mortar, Monokote MK6, Basalt and others. Ideal to be used as a fireproofing sprayer.
The Ez-Tex SprayAll 30-300X model does not include air adjustments.
Hopper includes:
15mm Spray nozzle.
Brass air jet.
Viscosity funnel.
45 degree elbow for spraying on ceiling.
30-100H Face coat and GFRC Sprayer
Ideal for the application of decorative cement finish on floor areas. Similarly, It can also spray the first face/mist coat on GFRC molds.
It features:
-
The hopper handles’ ergonomic design feels good in the hands. Therefore, comfort is guaranteed.
-
Special 40 degree hopper neck for spraying horizontal to flooring and GFRC decorative molds.
-
A 2.5 gallon hopper.
-
Gun includes 4 spray nozzles: 1/8”, 3/16”, 1/4”, and 5/16”. In other words, You can achieve different texture finishes.
-
Air adjustment valve for spraying control.
-
Air quick connector. In short, ready to go!
-
Fluid volume control at the back of the gun.
In conclusion, the best face coat sprayer in the market!
30-300C Sprayer for MK6 monokote, Stucco, Mortar and GFRC
This equipment will spray:
Sand /Cement Slurries, stucco finish, plaster spray products, Grout, Monokote Mk-6, Cafco-300, and other fireproofing materials.
For best performance we recommend using 12 cfm @ 100 psi (340 liter@ 7 bar) gas power or electric air compressor, with a 15 to 30 gallon (60-114 liter) air tank.
10-127/19 Pole Gun
This style gun is excellent to use when abrasive material must be apply in tight area, if need to use with the Rotortex.
16-311D &16-050 Trigger Gun
Our trigger gun is excellent for spraying drywall texture, American clay, Decorative concrete finishes, Fine and medium E.I.F.S finishes.
Trigger gun includes:
1/8″, 3/16″, 1/4″ and 5/16″ round nozzles
Fine finis spray kit includes 3 nozzle
3/4″ ball valve.
10-050 Spray Tip
please note: this kit will fit our old style 10-311 gun and will not fit the new gun
16-311J
Assembly guide for the fine finish spray tip. Note: item # 4 is the 5/16″ spray tip. If other tips will be install the texture finish will change. We recommended that you select the tip size that will give you the best texture spray finish that you desire.