3 Foot pole gun with fine finish spray tip,
no more banding over while spraying
see more how it works on the page of the RS100
10-128 Pole Gun for RS100 Sprayer
$425.00
Weight | 12 lbs |
---|---|
Dimensions | 36 × 6 × 6 in |
Related Products
P/N 30-100H
The best solution for face coat GFRC Concrete countertops, Pools, or any application that requires downward spray. The Benron’s Deck Hopper Gun has a specialized bucket that eliminates spills, and improved downward spray comfort. The flexible neck further assists spraying flat and elevated surfaces.
- 40° Hopper Angle for Easy Downward Spray
- Large 2.5 Gallon Hopper with Built In Control
- Requires minimum 6 CFM free air at 30 PSI
30-100H Face coat and GFRC Sprayer
Ideal for the application of decorative cement finish on floor areas. Similarly, It can also spray the first face/mist coat on GFRC molds.
It features:
-
The hopper handles’ ergonomic design feels good in the hands. Therefore, comfort is guaranteed.
-
Special 40 degree hopper neck for spraying horizontal to flooring and GFRC decorative molds.
-
A 2.5 gallon hopper.
-
Gun includes 4 spray nozzles: 1/8”, 3/16”, 1/4”, and 5/16”. In other words, You can achieve different texture finishes.
-
Air adjustment valve for spraying control.
-
Air quick connector. In short, ready to go!
-
Fluid volume control at the back of the gun.
In conclusion, the best face coat sprayer in the market!
30-200 Stucco sprayer hopper gun
Our Stucco Sprayer Hopper Gun 30-200 can be used for plastering a stucco house, traditional plastering of stuccos such as one coat or three coat stucco or GFRC.
The range is from 1/8″ heavy texture to 1″ thick structural layers.
It can also be used for applying plaster, hard coat stucco, EIFS, small scale shotcrete, papercrete, earthen mixes and more.
Hopper is made from stainless steel material, with a life time anti-rust guarantee.
RS300-350 Road Marking Sprayer
Our new, patented 1:1 and 98:2 plural component sprayer that can deliver MMA (Methyl Methacrylate) Anti-Skid Aggregates Pavement Marking
The advantage of the RS300-350 is the capability to use an externally towed air compressor, allowing for more CFM while the unit delivers 2GPM. This provides more bike lane coverage: up to 90 square feet per minute.
16-050 Spray Tip
This fine finish spray tip kit will fit only gun part number 16-311J
Assembly guide for the fine finish spray tip. Note: item # 4 is the 5/16″ spray tip. If deferent tip will be install the texture finish will change. We recommended that you select the tip size that wiil give you the best texture spray finish that you desire.
Drywall Texture Sprayer 20-230NSS
Our patented Stainless Steel Air Atomizer, P/N 20-230NSS model N, will fit most airless guns in the marketplace. Gun not included.
Gun nut adapter with “G” Thread 7/8-1 Air valve regulator.
Includes three tips: 1/8″, 3/16″, and 1/4″ round tips.
This equipment is ideal to spray texture on drywall.