Weight | 6 lbs |
---|---|
Dimensions | 10 × 10 × 10 in |
30-200 Stucco sprayer hopper gun
$215.00 $235.00
Related Products
30-300-E GFRC Sprayer
The 30-300-E spraying equipment features a 40 degree angle hopper. This hoppers allows to spray cement and fiber inside molds. Its design and power makes it ideal for spraying GFRC or Basalt, premix with 1/2″, 3/4″ or 1″ fiber, into counter-top molds.
Unlike the standard model 30-300, this hopper does not include 45 deg elbows.
30-300 Sprayer for Fireproofing, Monokote, Stucco, GFRC and Mortar
The 30-300 is the best fireproofing sprayer in the market. It’s performance is unmatched by any other brand out there.
Also ideal for spraying stucco, and it does it just like a large rig.
This model can spray traditional plastering such as one coat (or three coat) stucco. Moreover, it is also capable of spraying EIFS, papercrete, straw-bale, earthen mixes, and more.
P/N 30-100H
The best solution for face coat GFRC Concrete countertops, Pools, or any application that requires downward spray. The Benron’s Deck Hopper Gun has a specialized bucket that eliminates spills, and improved downward spray comfort. The flexible neck further assists spraying flat and elevated surfaces.
- 40° Hopper Angle for Easy Downward Spray
- Large 2.5 Gallon Hopper with Built In Control
- Requires minimum 6 CFM free air at 30 PSI
30-100HB Drywall Texture Hopper Gun
All of our texture hopper guns make the contractor’s job easier due to their user-friendly and thought-out design. However, this particular piece of equipment also comes in handy for the “do it yourself” application of stucco finish coats. In addition, it can be used to spray the first face/mist coat on the molds. Durable, effective and assembled in the US!
Read below for additional specs.
30-300-X Hopper for spraying GFRC
The Stucco Sprayer Hopper gun 30-300 series was specially designed to spray highly viscous cement materials. These materials as listed here: Glass fiber reinforced concrete GFRC, Stucco, Mortar, Monokote MK6, Basalt and others. Ideal to be used as a fireproofing sprayer.
The Ez-Tex SprayAll 30-300X model does not include air adjustments.
Hopper includes:
15mm Spray nozzle.
Brass air jet.
Viscosity funnel.
45 degree elbow for spraying on ceiling.
10-127/V3 Pole Gun
A special 1.25″ pole gun for spraying fireproofing Monokote Mk-6,
Cafco 300, stucco and more products.
30-100H Face coat and GFRC Sprayer
Ideal for the application of decorative cement finish on floor areas. Similarly, It can also spray the first face/mist coat on GFRC molds.
It features:
-
The hopper handles’ ergonomic design feels good in the hands. Therefore, comfort is guaranteed.
-
Special 40 degree hopper neck for spraying horizontal to flooring and GFRC decorative molds.
-
A 2.5 gallon hopper.
-
Gun includes 4 spray nozzles: 1/8”, 3/16”, 1/4”, and 5/16”. In other words, You can achieve different texture finishes.
-
Air adjustment valve for spraying control.
-
Air quick connector. In short, ready to go!
-
Fluid volume control at the back of the gun.
In conclusion, the best face coat sprayer in the market!
30-300C Sprayer for MK6 monokote, Stucco, Mortar and GFRC
This equipment will spray:
Sand /Cement Slurries, stucco finish, plaster spray products, Grout, Monokote Mk-6, Cafco-300, and other fireproofing materials.
For best performance we recommend using 12 cfm @ 100 psi (340 liter@ 7 bar) gas power or electric air compressor, with a 15 to 30 gallon (60-114 liter) air tank.