Proudly made in the USA.
Our Stucco Sprayer Hopper Gun can be used for plastering a stucco house, traditional plastering of stuccos such as one coat or three coat stucco or GFRC.
The range is from 1/8″ heavy texture to 1″ thick structural layers.
It can also be used for applying plaster, hard coat stucco, EIFS, small scale shotcrete, papercrete, earthen mixes and more.
Hopper made from stainless steel material, with a life time anti-rust guarantee.
Sand /Cement Slurries, plaster
spray products, Grout, GFRC, GFRG
Monokot Mk-6, Cafco-300, and other
For best performance we recommend using 12 cfm @ 100 psi
(340 liter@ 7 bar)
gas power or electric air compressor, with 15 to 30 gallon
(60-114 liter) air tank.
We also include 4 additional brass air jets to use with small air compressore that delivers only 4-6 cfm @ 90 psi.
If you need to spray ceilings, just tape 3” on the back of the hopper so the material will not spill when lifting the hopper on an angle.
For extra hopper care and easy clean use LPS-3 before use.