"Slick-Tex" is the first option for priming the Rotortex and the R2 when using materials As:
Stucco.
Synthetic Stucco.
E.I.F.S.
Texture coating products.
Polymer Modified Cement Products.

When using the "Slick-Tex ", it will protect the pump and hose, and will eliminate particals like sand, perlite etc, to separate from its base material.

Just mix the bag in a 4 gallon of water,
and let it set for 5 minutes.
Insert 1 cleaning ball into the hose through the quick connector and connect to pump.
This step will allow the "Slicktex" to travel all around the surface of the hose.

Add the "Slick-Tex " on the hopper turn on the Rotortex and wait until the ball gets to the other side of the hose.
Turn the Rotortex off.
Apply your material in the hopper, turn Rotortex on.
Material will push the "Slick-Tex" out from the hose.

Advantages

* Increases ease and range of pumpability
* Decreass wear on equipment
* Decreases horsepower required for pumping
* Reduces friction and line pressure
* Improves mobilty and consolidation
* Minimizes slump and air loss through pump lines
* Reduces dewatering of concrete
"Slick-Tex" is packaged in ready-to-use water soluble

Description

"Slick-Text" is a dry powered concete pumping aid packages, ready-to-use water solublebag.
"Slick-Tex" is uniquely formulaed to provide the concrete pumper with a cost effective method for improving the pumpability of had to pump and/or harsh concrete and grout mixes.
Additionally,"Slick-Tex" reduces line pressure, improves flor properties and increase the rate an range of pumpability. "Slick-Tex" does not contain calcium chloride, nitrates, nitrites or other potentially corrosive materials and is compatible with all standard concrete admixtures.
In addition "Slick-Tex" contains no bentonite, cementitious materials, soap or air entraining agents.

The "slick-Tex" package in 4 oz baggy
it it will last for 25 up to 50 uses.

For only $5.25 a baggy

Free Shipping For $75.00 Order

Click to print Material Safety Data Sheet